Review: Walkera Master CP 6CH CCPM Helicopter

Posted on 23 Sep 2012 by RC-Fever.com  

 

Today we will introduce you a new 250class walkera 6ch helicopter - Master CP.

You can see the box size of Master CP is similar to the CB180 and V200D helicopter, with dimension 57 x 20 x 25cm. What this box included? Let's see below:

You will have a transmitter, I show Devo7 at this time, your can also have the DSC cable, the screwdriver, the hex screwdrivers, bind plug and manual with Devo transmitter if you buy the combo set.

What is the use of the bind plug? It is used to plug into the receiver so that it can bind to a specific transmitter. The transmitter will send out a code ID, it can lock into the receiver so that in the near time you can rebind it in a faster way. Also you can use the bind plug to remove the code ID that saved into the receiver.

Walkera's Master CP combo set has no charger and battery so that you need to buy it separately. You can buy both from the Master CP parts list.

This is the box protect the Master CP, the box likes so weak but in fact the protection plastic is very firm and strong that even let me feel hard to open it.

Let’s see the specification of Master CP:

  • Main Rotor Diameter: 462mm
  • Tail Rotor Diameter: 113 mm
  • Overall Length: 440mm
  • All-up Weight: 420g (Battery included)
  • Battery: 11.1V 1000mAh Li-Po
  • Moril Motor: 380PF
  • Tail Motor: 1627PF
  • GYRO: 6-axis
  • Receiver: RX-2637H-D
  • Servo: WK-7.6-6
  • Transmitter (standard):DEVO 7
  • Transmitter (Optional):DEVO-6/ 7/ 8s/ 10/ 12s

After take off the canopy, you can see the power cable is very thick and firm, you can see the structure is very protective, no electric board expose under the canopy. The receiver is protected and the ESC is protected, therefore many user say Master CP is durable in crash. The main motor is big in size in order to maximize the up thrust power.

This is the Master CP Blade that using the carbon fiber, light in weight but hard during crash. Rarely do walkera use the carbon fiber on the blade.

The tail blade and tail motor is really big, provide the absolute powerful force on the rotating action, you can see the tail motor is well protected by the hard plastic box, looks durable.

The CCPM systems is control by the three servos just like other 6CH helicopter, you can see the rotor head is made by plastic with the light weight, much more flexible.

Let’s see the comparison of Master CP and Mini CP family, why we call them family? Since they are both 6CH, Red in color and they are both durable, some friends said that their Mini CP survives after about 300 crashes.

If you like Mini CP, you must like Master CP, Master CP is much larger then Mini CP, allow you to easy fly outside without consider the wind. However, Mini CP can only fly outside if no or little wind. Buy a Master CP from RC FEVER.