As Nine Eagles Solo Pro flybar will easily hit the canopy or tail boom, and there’ s one solution mentioned in Nine Eagles Solo Pro II mod which is by shortening the flybar. But still, the flybar may keep twitchy due to disc lag when undergo quick cyclic because of the ell head design. This mod is by turning the Bell head into Bell Hiller head, so pilot enable to control the flybar disc tilt and the NE solo pro would response quick. The straight rigid flybar help avoid the flybar strike on body. This mod can reduce the slopping and flybar hit on body obviously ,meanwhile, fixing the problem in fast forward flight(FFF).
You can see the post-mod outlook of the Nine Eagles Solo Pro. Hexagonal plastic hub and paddles are adopted.
Video showing the performance after mod.
Nine Eagles Solo Pro Mod Guide
First, get the Walkera 4#3 Flybar Pivot, together with the hexagonal plastic hub.
Then glue the ball linkages next to the plastic hub. You can see that clearly at the zoom-in.
You can see straight through flybar, hexagonal pivot, ball linkages are all on the same plane.
No flybar strike on canopy or tail boom.
Now, you may have a look at the post-modification outdoor flight.
SMYFC5XB2953
No related posts.
Tags: nine eagles, nine eagles solo pro
[...] and mainshaft repairing. Details and videos please check following post:Skid, Flybar, Mainshaft ModBell Hiller ModTail Rotor Shaft Drive ModMSR Lipo Conversion ModNine Eagles Solo Pro Vs Blade MCXThere are heated [...]
I noticed in at least one of you vids, that you now have the fly bar mounted underneath the main rotors, and also you have rotor blades that swivel instead of the rigid mount like on the original.
What did you do for those two mods?
[...] Nine Eagles Solo Pro – Bell Hiller Mod | RC Helicopter DIY MODs … Jul 29, 2010 … As Nine Eagles Solo Pro flybar will easily hit the canopy or tail boom, and there' s one solution … [...]