ABOUT 4G6S

4G6S is the first palm size helicopter equipped with 3-Axis Gyro with Auto Stabilizing Technology, with these you can perform aerobatics indoor. It’ s highly recommended for pilots who are going to transit from coaxtial / fixed pitch to collective pitch helicopters. Don’ t mix up with the other model 4G6, it’ s difficult to manage without 3 axis gyro. Back to 4G6S, it’ s self stabilization via 3-axis gyro make this helicopter super stable, handle wind excellence, and the tail holds well too. Though the foam blade is easily damaged and probably be prepared for buying extra spare set of gears, the cost is low.

After a flight, you will found that the 4g6s motor is VERY hot and may result in lost of torque. So, don’t forget to let it take a rest between flights.

4G6S VIDEO

Moreover, flybarless is doable on 4G6S, details can be found here. With proper setup, it can perform some 3D flying such as rolls, inverted and swoop flights.

4G6S TRANSMITTERS

TX 2602

Advantages of TX 2602

Price lower than TX 2801 Pro
Sufficient to fly, binds to 3 axis receiver without hassle

Disadvantages of TX 2602

Only one model can be bound
Don’ t support multi-models
Limited adjustment of pitch and throttle curves
No curves display on LCD screen
No throttle hold

TX 2801 Pro

Advantages of TX 2801 Pro

Good adjustments for pitch and throttle curves
Memory for at most 8 models (including helis and planes)
Offers 3 helicopter flight modes and all are allowed for free setting and adjustment.
Support wireless data transfer between 2 transmitters
Throttle hold available

Disadvantages of TX 2801 Pro

More expensive than TX 2602
More actions required for the setup with 3-axis gyro

MORE 4G6S FEATURES

The usage of highly efficient shaft transmission system saves power up to 15%.
One cell lipo assures a certain safety either charging home or flying outdoor.
3.7V torque brushless motor offers vigorous power in flight.
A perfect combination of 3-Axis-gyro auto-balance system and the initiative super-to-voltage head–locking system.

4G6S SPECIFICATIONS

Gyro: 3 Axis
All-up Weight: 88g (Battery included)
Tail Rotor Dia. : 76mm
Main Rotor Dia. : 258mm
Overall Length: 290mm
Receiver: RX-2610S
Transmitter: WK-2602 / WK – 2801 Pro
Brushless Speed Controller: WK-WST-10A-L3
Brushless Motor: WK-WS-12-005
Battery: 3.7V 600mAh Li-Po
Servo: wk-02-1
Weight 3.18g
speed 0.12sec/60o(3.0~4.5V)
Torque 0.12kg/cm (3.0~4.5V)
Dimension 19.2*8.3*19.7mm

No related posts.

Tags: 4g6s, remote control helicopter, walkera 4g6s

This entry was posted on Saturday, July 10th, 2010 at 2:05 pm and is filed under RC helicopter news. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.